Jessar Product Content — current, ready to review

A flame that flickers without a spark. This Xtricity LED bulb mimics a moving flame in a warm, candle-like 1800K soft white, turning a porch, mantel or corner into something cozier. A built-in gravity sensor keeps the flame pointing up in any position — all on 2 watts.

This decorative E26 bulb brings the look of an open flame to indoor and outdoor spaces. Its moving flame effect casts a warm, candle-like 1800K soft white glow, and a built-in gravity sensor keeps the flame upright however the bulb is oriented — even installed upside down. It draws 2W, is rated for damp locations and fully enclosed fixtures, and works down to -20°C (-4°F). Non-dimmable; for 120V/60Hz circuits only. Single bulb, with a 25,000-hour rated life and a 1-year limited warranty.

Crisp, true daylight that makes colours pop and fine details snap into focus. This 13W full-spectrum compact fluorescent floods task areas, reading nooks and workspaces with a clean 6400K glow — 800 lumens of accurate, easy-on-the-eyes light from a single energy-conscious lamp.

This 13W PL13-2U compact fluorescent lamp delivers full-spectrum 6400K daylight — a crisp, colour-accurate light ideal for task areas, reading and workspaces. It produces 800 lumens of brightness while replacing a 60W incandescent bulb. The 4-pin base fits compatible CFL fixtures equipped with an electronic ballast. Non-dimmable and built for 120V operation, it is a straightforward, energy-conscious upgrade wherever clear, neutral illumination matters.

The gentlest glow in the room. Exposed S14 filaments sit behind smoked amber glass, pouring a warm 2200K light into a space — old-fashioned Edison styling with LED efficiency, dimmable to set the level you want.

This 3-pack of S14 filament LED bulbs gives a warm 70-lumen accent glow at 1W, replacing a 10W incandescent at about $0.12 per bulb per year. The smoked amber glass and exposed filaments read as classic Edison, and the 2200K soft white tone stays warm and candlelight-adjacent. Dimmable for adjustable ambiance (may not work with all dimmers), with a standard E26 base rated for indoor and outdoor use, including damp locations and enclosed fixtures down to -20°C (-4°F). 15,000-hour rated life. For 120V/60Hz circuits only; 1-year limited warranty.

Everyday warmth at a fraction of the draw. This 9W A19 bulb gives the full 800-lumen brightness of a 60W incandescent in a 3000K soft white — the comfortable tone that settles living rooms and bedrooms into an inviting glow.

This Xtricity 9W LED bulb gives 800 lumens of warm 3000K soft white light and replaces a 60W incandescent — comfortable, inviting light for living rooms, bedrooms and ambient fixtures. The familiar A19 shape and standard E26 medium base fit common household lamps, and it runs in damp locations and fully enclosed fixtures down to -20°C (-4°F). 15,000-hour rated life (about 13.7 years at 3 hours a day). Non-dimmable; for 120V/60Hz circuits only. Single bulb, with a 1-year limited warranty.

Two bulbs, one warm idea. Each A19 gives the full 800-lumen brightness of a 60W incandescent on 9W, in a comfortable 3000K soft white. Spread an even, inviting light across living rooms and bedrooms — for about a dollar a year per bulb.

This 2-pack of Xtricity 9W LED bulbs gives 800 lumens of warm 3000K soft white per bulb, replacing 60W incandescents at an estimated $1.08 per year each. A wide 180° beam spreads light evenly, which suits living rooms, bedrooms and ambient fixtures. The A19 shape and standard E26 medium base fit common lamps, and each is rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). Non-dimmable; 15,000-hour rated life. 1-year limited warranty.

Relamp the whole home in one go. This 6-pack of A19 bulbs each gives the full 800-lumen brightness of a 60W incandescent on 9W, in a warm 3000K soft white — enough to refresh every lamp and ambient fixture at once.

This 6-pack of Xtricity 9W LED bulbs lets you stock up and relamp the whole home at once. Each gives 800 lumens of warm 3000K soft white and replaces a 60W incandescent — well suited to living rooms, bedrooms and ambient fixtures. The familiar A19 shape and standard E26 medium base fit common lamps, with a wide 180° beam for even light. Each is rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). Non-dimmable; 15,000-hour rated life.

Crisp, neutral daylight for the spaces that need clarity. This 9W A19 bulb gives 800 lumens of clean 5000K white — the right light for kitchens, workspaces and task areas — and replaces a 60W incandescent.

This Xtricity 9W LED bulb gives 800 lumens of crisp 5000K daylight — a clean, neutral white for kitchens, workspaces and task areas where accurate light matters. It replaces a 60W incandescent. The familiar A19 shape and standard E26 medium base fit common household fixtures, and it runs on 120V. Non-dimmable; 15,000-hour rated life. Single bulb.

Clean, energizing daylight in a practical pair. Each A19 throws 800 lumens of crisp 5000K white on 9W — the neutral, accurate light kitchens, garages and task areas run on, in place of a 60W incandescent.

This 2-pack of Xtricity 9W LED bulbs gives 800 lumens of crisp 5000K daylight per bulb — a clean, neutral white for kitchens, workspaces, garages and task lighting. Each replaces a 60W incandescent. The A19 shape and standard E26 medium base fit common lamps, with a wide 180° beam for even coverage, and each is rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). Non-dimmable; 15,000-hour rated life.

Stock up on clarity. This 6-pack of A19 bulbs each gives 800 lumens of crisp 5000K daylight on 9W — the clean, neutral light kitchens, garages and task areas need — enough to relamp every working fixture at once.

This 6-pack of Xtricity 9W LED bulbs lets you outfit multiple fixtures at once. Each gives 800 lumens of crisp 5000K daylight — a clean, neutral white for kitchens, workspaces, garages and task lighting — and replaces a 60W incandescent. The A19 shape and standard E26 medium base fit common lamps, with a wide 180° beam for even coverage. Each is rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). Non-dimmable; 15,000-hour rated life.

Set the mood, then dial it in. This 9.5W A19 bulb glows in a warm, inviting 3000K soft white and dims smoothly on standard dimmer switches — 800 lumens of adjustable comfort for living rooms, dining rooms and bedrooms, in place of a thirsty 60W incandescent.

This Xtricity 9.5W dimmable LED bulb delivers 800 lumens of warm 3000K soft white light — an inviting tone for living spaces and ambient lighting — and replaces a 60W incandescent for major energy savings. Fully compatible with standard dimmer switches, it lets you adjust brightness to suit the moment in living rooms, dining rooms and bedrooms. The standard E26 medium base runs on 120V and fits common household fixtures. A versatile, energy-conscious everyday bulb wherever adjustable, warm light is wanted.

Warm, adjustable light in a practical pair. Each 9.5W A19 glows in an inviting 3000K soft white and dims smoothly on standard dimmer switches — 800 lumens of mood-ready comfort for living rooms, dining rooms and bedrooms, replacing a 60W incandescent.

This value 2-pack of Xtricity 9.5W dimmable LED bulbs delivers 800 lumens of warm 3000K soft white light per bulb — an inviting tone for living spaces and ambient lighting — while replacing 60W incandescents for major energy savings. Both are fully compatible with standard dimmer switches for adjustable brightness in living rooms, dining rooms and bedrooms. The standard E26 medium base runs on 120V and fits common household fixtures. A practical pair wherever warm, adjustable light is needed.

Relamp the whole home with warm, adjustable light. This value 6-pack of 9.5W A19 bulbs each glows in an inviting 3000K soft white and dims smoothly on standard dimmer switches — 800 lumens apiece, ready to set the mood in every room, replacing 60W incandescents.

This value 6-pack of Xtricity 9.5W dimmable LED bulbs is built for whole-home relamping. Each delivers 800 lumens of warm 3000K soft white light — an inviting tone for living spaces and ambient lighting — while replacing a 60W incandescent for major energy savings. Fully compatible with standard dimmer switches, they let you adjust brightness in living rooms, dining rooms and bedrooms. The standard E26 medium base runs on 120V and fits common household fixtures. A practical pack for outfitting multiple fixtures at once.

Crisp daylight you can dial in. This 9.5W A19 bulb throws 800 lumens of energizing 5000K white — good for kitchens, workshops and task lighting — and dims on standard dimmers, in place of a 60W incandescent.

This Xtricity 9.5W dimmable LED bulb gives 800 lumens of crisp 5000K daylight white — a clean, energizing tone for kitchens, workshops and task lighting — and replaces a 60W incandescent. It dims on most standard dimmers (may not work with all dimmers), uses the familiar A19 shape and a standard E26 medium base, and is rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). 15,000-hour rated life. Single bulb, with a 1-year limited warranty.

Crisp, energizing daylight you can dial in — now in a practical pair. Each 9.5W A19 throws 800 lumens of clean 5000K white, good for kitchens, workshops and task lighting, and dims on standard dimmers in place of a 60W incandescent.

This 2-pack of Xtricity 9.5W dimmable LED bulbs gives 800 lumens of crisp 5000K daylight white per bulb — a clean, energizing tone for kitchens, workshops and task lighting — and replaces 60W incandescents. Both dim on most standard dimmers (may not work with all dimmers), use the familiar A19 shape and a standard E26 medium base, and are rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). 15,000-hour rated life. 1-year limited warranty.

Stock up on crisp, adjustable daylight. This value 6-pack of 9.5W A19 bulbs each throws 800 lumens of clean 5000K white — ideal for kitchens, workspaces and task areas — and dims smoothly on standard dimmers, replacing 60W incandescents room by room.

This value 6-pack of Xtricity 9.5W dimmable LED bulbs is built for whole-home relamping. Each delivers 800 lumens of crisp 5000K daylight — a clean, neutral white ideal for kitchens, workspaces and task areas — while replacing a 60W incandescent for major energy savings. Fully compatible with standard dimmer switches for adjustable brightness, they use a standard E26 medium base and run on 120V. A practical pack for outfitting multiple fixtures where clear, adjustable light is needed.

A focused-flood GU10 for the spaces you want to light up. This 7W spotlight throws 500 lumens of crisp 5000K white through a 40° flood beam — good for track, accent and display fixtures — and twists straight into standard GU10 sockets, no transformer. Four to a pack.

This 4-pack of Xtricity 7W GU10 LED spotlights gives 500 lumens of crisp 5000K daylight white through a 40° flood beam — clean, directed light for track lighting, accent and display fixtures — replacing a 50W halogen spotlight. The twist-and-lock GU10 base is a direct fit for standard GU10 track and recessed fixtures with no transformer needed, and the bulbs dim on most standard dimmers (may not work with all dimmers). Rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). 15,000-hour rated life. 1-year limited warranty.

The warm, vintage glow of a filament bulb, in LED. Exposed filaments shine through a smoked G25 globe, casting a candlelight-warm 2200K light at 5W. A classic decorative shape that dims for vanity bars and open fixtures.

This 5W LED filament G25 globe bulb gives 350 lumens of warm 2200K soft white light — a candlelight-adjacent glow for vanity bars, pendants and open fixtures — and replaces a 40W incandescent. The smoked globe finish and exposed LED filaments deliver an old-fashioned Edison look. Dimmable for adjustable ambiance (may not work with all dimmers), with a standard E26 medium base and a 15,000-hour rated life. Single bulb, with a 1-year limited warranty.

Smoked glass and exposed filaments, lit or unlit. Each candle bulb draws 5W in place of a 40W incandescent and casts 350 lumens of warm 2200K light — the close, candlelight tone that suits chandeliers and sconces. Dimmable, though not with every dimmer.

A 2-pack of smoked LED filament candle bulbs that replace a 40W incandescent on just 5W each. The exposed filaments give the old-fashioned Edison look, and the smoked glass softens 350 lumens of 2200K light into a warm, close glow. The Type C candle shape suits chandeliers, sconces and accent fixtures. Each bulb is dimmable (it may not work with every dimmer), runs on a standard E26 medium base, and carries a 15,000-hour rated life. Suitable for damp locations and enclosed fixtures down to -20°C (-4°F). Backed by a 1-year limited warranty.

A right-sized glow for the quieter corners. This 6W A19 bulb gives you 450 comfortable lumens of warm 3000K soft white — the perfect measure for table lamps, hallways and accent fixtures — while replacing a 40W incandescent at a fraction of the energy.

This Xtricity 6W LED bulb delivers 450 lumens of warm 3000K soft white light — a right-sized output for table lamps, hallway fixtures and accent lighting where a full 9W is more than needed. It replaces a 40W incandescent for major energy savings. The familiar A19 shape and standard E26 medium base fit common household lamps and fixtures, and it is suitable for damp locations and fully enclosed fixtures down to -20°C (-4°F). Non-dimmable; long 15,000-hour rated life. Single bulb, backed by a 1-year limited warranty.

A right-sized burst of clarity. This 6W A19 bulb delivers 450 lumens of crisp 5000K daylight — the clean, neutral tone task lamps and utility fixtures want — while replacing a 40W incandescent for real energy savings.

This Xtricity 6W LED bulb delivers 450 lumens of crisp 5000K daylight — a clean, neutral white for task and utility lighting where 9W is more than needed. It replaces a 40W incandescent for major energy savings. The standard E26 medium base fits common household fixtures, and the bulb runs on 120V. Non-dimmable, it is a right-sized, energy-conscious choice wherever a clear, neutral tone matters.

Clear, neutral light for the rooms that need to see. This 9W A19 puts out 800 lumens of 5000K daylight — the brightness of a 60W incandescent, spread evenly across kitchens, workshops and task areas at a fraction of the draw.

A 9W A19 LED that delivers 800 lumens of 5000K daylight — a clean, neutral white for kitchens, workspaces, garages and task lighting, with the output of a 60W incandescent at a fraction of the energy. The wide 180° beam spreads light evenly, and the A19 shape with a standard E26 medium base fits common lamps and fixtures. Suitable for damp locations and fully enclosed fixtures down to -20°C (-4°F). Non-dimmable, with a 15,000-hour rated life. Backed by a 1-year limited warranty.

Light your plants need, from any ordinary lamp. This 10W full-spectrum grow bulb pairs blue wavelengths for leafy growth with red wavelengths for flowering and fruiting — supporting plants from seedling to bloom — and screws into a standard E26 socket.

This 10W Xtricity full-spectrum LED grow bulb supports plants from seedling to bloom, for indoor and hydroponic growing. Its blue spectrum (400–520 nm) promotes vegetative growth, while its red spectrum (610–720 nm) promotes flowering and fruiting. At 10W it is an efficient supplemental light, and the standard E26 medium base screws into common lamps and fixtures — no special equipment required. Non-dimmable. Suitable for damp locations and fully enclosed fixtures, down to -20°C (-4°F). 15,000-hour rated life; 1-year limited warranty.

Aim light where plants need it. This 8W full-spectrum PAR38 flood directs blue wavelengths for leafy growth and red wavelengths for flowering and fruiting — from seedling to bloom, in any standard E26 fixture, including hydroponic setups.

An 8W full-spectrum PAR38 grow flood that supports plants from seedling to bloom, suited to indoor and hydroponic growing. The directional PAR38 reflector aims light onto the plant. The blue spectrum (400–520 nm) drives vegetative growth; the red spectrum (610–720 nm) drives flowering and fruiting. The standard E26 medium base screws into common lamps and fixtures — no special equipment needed. Suitable for damp locations and enclosed fixtures down to -20°C (-4°F). Non-dimmable, with a 15,000-hour rated life and a 1-year limited warranty.

Three light levels, no dimmer required. Xtricity's TriLight technology lets you cycle brightness with an ordinary wall switch — a quick flick chooses your level. At full output it pours 800 lumens of crisp 5000K daylight, all from a 9W bulb that replaces a 60W incandescent.

This Xtricity 9W TriLight LED bulb lets you adjust brightness using an ordinary wall switch — no dimmer or 3-way socket required. Simply flick the switch off and on within 2 seconds to cycle through brightness levels, then leave it off for 5 seconds to lock in your chosen level. At full brightness it delivers 800 lumens of crisp 5000K daylight white, replacing a 60W incandescent. The A19 shape and standard E26 medium base fit common household fixtures, with a long 15,000-hour rated life. Single bulb, backed by a 1-year limited warranty.

Direct, true-to-colour light where you want it. This compact 5.5W R16 reflector casts 400 lumens of crisp 5000K daylight across a 110° beam — good for highlighting artwork, retail displays and accents — in place of a 30W halogen reflector.

This Xtricity 5.5W R16 LED reflector gives 400 lumens of crisp 5000K daylight white across a wide 110° beam — true-to-colour light for highlighting artwork, retail displays and accents — replacing a 30W halogen reflector. The compact R16 shape and standard E26 medium base are a direct fit for track and accent fixtures, and the bulb dims on most standard dimmers (may not work with all dimmers). Suitable for damp locations and fully enclosed fixtures, down to -20°C (-4°F). 15,000-hour rated life. Single bulb, with a 1-year limited warranty.

Chandelier sparkle on a whisper of energy. These clear-glass candle bulbs show off their exposed LED filaments in open chandeliers and sconces — 500 lumens of warm 3000K soft white each, on 5.5W in place of a 60W incandescent. Dimmable, though not with every dimmer.

A 2-pack of clear-glass filament candle bulbs that bring the Edison look to open chandeliers and sconces, with exposed LED filaments on view. Each gives 500 lumens of warm 3000K soft white while replacing a 60W incandescent on just 5.5W. The candelabra E12 base fits chandeliers, sconces and decorative fixtures, and the bulbs are dimmable (they may not work with every dimmer). Suitable for damp locations and enclosed fixtures down to -20°C (-4°F). 15,000-hour rated life. Two to a pack, backed by a 3-year limited warranty.

The Edison filament look, softened. Frosted glass diffuses the warm 3000K light of these candelabra candle bulbs — 500 lumens each on 5.5W in place of a 60W incandescent — for even, glare-free light in chandeliers, sconces and decorative lamps. Dimmable, though not with every dimmer.

A 2-pack of frosted-glass filament candle bulbs that give the Edison filament look with gentler, glare-free light. The frosted glass diffuses the glow, and each bulb puts out 500 lumens of warm 3000K soft white while replacing a 60W incandescent on just 5.5W. The candelabra E12 base fits chandeliers, sconces and decorative fixtures, and the bulbs are dimmable (they may not work with every dimmer). Suitable for damp locations and enclosed fixtures down to -20°C (-4°F). 15,000-hour rated life. Two to a pack, backed by a 3-year limited warranty.

Decorative candle character that fits your everyday fixtures. With a standard medium base and exposed LED filaments behind clear glass, these candle bulbs bring a classic Edison look and warm 3000K glow to open fixtures — 500 bright lumens each on just 5.5W, dimmable to taste.

This 2-pack of Xtricity clear-glass filament candle bulbs pairs a decorative candle shape with a standard E26 medium base, so it fits common household fixtures. Exposed LED filaments behind clear glass give a classic Edison look that shines beautifully in open fixtures, and each bulb delivers a bright 500 lumens of warm 3000K soft white while replacing a 60W incandescent at just 5.5W. Fully dimmable with a long 15,000-hour rated life. Two to a pack, backed by a 1-year limited warranty.

Soft, even candle light for everyday fixtures. Frosted glass diffuses the Edison filament glow into a glare-free warmth, and the standard medium base slots straight into common fixtures — 500 lumens of 3000K soft white each, on 5.5W in place of a 60W incandescent. Dimmable, though not with every dimmer.

A 2-pack of frosted-glass filament candle bulbs that give the Edison filament look with gentler, glare-free light. The frosted glass diffuses the glow, and the standard E26 medium base lets the decorative candle shape fit common household fixtures. Each bulb puts out 500 lumens of warm 3000K soft white while replacing a 60W incandescent on just 5.5W, and the bulbs are dimmable (they may not work with every dimmer). Suitable for damp locations and enclosed fixtures down to -20°C (-4°F). 15,000-hour rated life. Two to a pack, backed by a 3-year limited warranty.

A premium glass spotlight that looks the part. This 5W GU10 throws a focused 400-lumen beam of warm, flattering 3000K soft white — ideal for accent and track lighting — with a glass housing that feels a cut above plastic LED spots. Four to a pack, fully dimmable.

This 4-pack of Xtricity 5W GU10 LED glass spotlights delivers a focused 400-lumen beam of warm 3000K soft white — flattering light ideal for accent and track lighting — while replacing a 35W halogen spotlight for major energy savings. The premium glass housing gives a higher-quality look and feel than plastic LED spots, and the twist-and-lock GU10 base is a direct fit for standard GU10 fixtures with no transformer needed. Fully dimmable with a long 15,000-hour rated life. Value 4-pack, backed by a 1-year limited warranty.

Exposed LED filaments glow inside clear G25 glass for a statement Edison look that belongs on display. Drawing just 5W in place of a 50W incandescent, it casts 500 warm lumens of 3000K soft white — the inviting centerpiece for vanity bars, pendants and open fixtures.

This G25 globe pairs a clear-glass envelope with exposed LED filaments, keeping the bulb itself part of the design in vanity bars, pendants and open fixtures. It replaces a 50W incandescent while drawing only 5W, delivering a bright 500-lumen decorative output in a warm, inviting 3000K soft white. The rounded G25 shape seats in any standard E26 medium base, and the bulb is fully dimmable so you can dial the glow up or down. Rated for 15,000 hours of life and sold as a convenient 2-pack, it's backed by a 1-year limited warranty.

Exposed filaments inside clear candle glass deliver the classic Edison glow your chandeliers and sconces were made for. Each bulb sips just 3.5W in place of a 40W incandescent, casting a warm 300-lumen decorative glow in soft white 3000K — and they arrive four to a pack.

This Type C candle bulb wraps exposed LED filaments in clear glass for a classic Edison look tailored to chandeliers and sconces. It replaces a 40W incandescent while drawing only 3.5W, producing a warm 300-lumen decorative glow in inviting 3000K soft white. The candelabra E12 base fits chandeliers, sconces and decorative fixtures, and the bulb is fully dimmable to fine-tune ambiance. Rated for 15,000 hours and sold as a value 4-pack ideal for multi-bulb chandeliers, it's backed by a 1-year limited warranty.

Smoked candle glass and exposed filaments conjure a moody, vintage Edison glow — candlelight-adjacent ambiance for chandeliers and sconces. At just 3.5W, each bulb casts a warm 250 lumens of 2200K soft white, and they come four to a pack ready to set the mood.

This Type C candle bulb sets exposed LED filaments behind smoked glass for a moody, vintage Edison look made for chandeliers and sconces. It produces a warm 250 lumens of 2200K soft white using just 3.5W, delivering candlelight-adjacent ambiance without the heat or upkeep of a flame. The candelabra E12 base fits chandeliers, sconces and decorative fixtures, and full dimming lets you ease the glow lower still. Rated for 15,000 hours and sold as a value 4-pack ideal for multi-bulb chandeliers, it's backed by a 1-year limited warranty.

A tall 152 mm tubular Edison filament behind smoked glass makes a striking vintage statement in pendants, open fixtures and exposed-bulb designs. At just 5W it casts a warm 250 lumens of 2200K soft white — candlelight-adjacent ambiance where the bulb is meant to be seen.

This Type T tube bulb stands 152 mm tall, its exposed Edison filament glowing behind a smoked-glass envelope for a vintage statement in pendants, open fixtures and exposed-bulb designs. It draws just 5W to produce a warm 250 lumens of 2200K soft white, delivering candlelight-adjacent ambiance without the heat of a true flame. The standard E26 medium base drops into common sockets, and the bulb is fully dimmable for setting the mood. Rated for 15,000 hours and sold as a single bulb, it's backed by a 1-year limited warranty.

An extra-long 203 mm tubular Edison filament behind smoked glass makes a dramatic vintage statement in pendants and exposed-bulb fixtures. Drawing just 8W, it casts a warm 350 lumens of 2200K soft white — candlelight-adjacent ambiance for spaces that deserve to be noticed.

This Type T tube bulb stretches 203 mm tall, its exposed Edison filament glowing behind a smoked-glass envelope for a dramatic vintage statement in pendants and exposed-bulb fixtures. It draws just 8W to produce a warm 350 lumens of 2200K soft white, delivering candlelight-adjacent ambiance without the heat of a true flame. The standard E26 medium base fits common sockets, and the bulb is fully dimmable for setting the mood. Rated for 15,000 hours and sold as a single bulb, it's backed by a 1-year limited warranty.

Exposed LED filaments inside clear Type S glass deliver a classic Edison look that shines in open fixtures and string lighting. Each bulb draws only 6.2W in place of a 60W incandescent, casting a bright 700-lumen decorative output in warm 3000K soft white — four to a value pack.

This Type S filament bulb wraps exposed LED filaments in clear glass for a classic Edison look that shines in open fixtures and string lighting. Each bulb replaces a 60W incandescent while drawing only 6.2W, producing a bright 700-lumen decorative output in warm, inviting 3000K soft white. The standard E26 medium base fits common sockets, and the bulb is fully dimmable to tune the glow. Rated for 15,000 hours and sold as a value 4-pack, it's backed by a 1-year limited warranty.

Smoked amber Type S glass and exposed filaments cast a moody, vintage Edison glow across open fixtures and string lighting. At 5W, each bulb warms a space with 400 lumens of 2200K soft white — candlelight-adjacent, four to a pack.

This Type S filament bulb sets exposed LED filaments behind smoked amber glass for a moody, vintage Edison look that suits open fixtures and string lighting. Each bulb gives a warm 400 lumens of 2200K soft white on 5W and replaces a 40W incandescent. The standard E26 medium base fits common sockets, the bulb dims on most standard dimmers (may not work with all dimmers), and it is rated for indoor and outdoor use, including damp locations and enclosed fixtures down to -20°C (-4°F). 15,000-hour rated life; sold as a 4-pack, with a 1-year limited warranty.

Exposed LED filaments in clear S14 glass — the patio and string-light Edison look. Each bulb draws 3W in place of a 40W incandescent and casts a warm 300-lumen glow in 3000K soft white, ready to set an inviting outdoor scene.

An S14 filament bulb that wraps exposed LED filaments in clear glass for the patio and string-light Edison look. It replaces a 40W incandescent on just 3W, giving a warm 300-lumen glow in 3000K soft white. The standard E26 medium base fits common sockets and string-light strands. Suitable for damp locations and enclosed fixtures down to -20°C (-4°F). Non-dimmable; do not use with a dimmer. 15,000-hour rated life, sold as a 2-pack, backed by a 1-year limited warranty.

Smoked S14 glass and exposed filaments give the patio and string-light Edison look a moody, vintage finish. At 3W in place of a 30W incandescent, each bulb casts a warm 200 lumens of 2200K soft white — the close, candlelight tone for bistro strands and Edison-style pendants.

An S14 filament bulb that sets exposed LED filaments behind smoked glass, giving the patio and string-light Edison look a moody, vintage finish. Each bulb produces a warm 200 lumens of 2200K soft white on just 3W, replacing a 30W incandescent. The standard E26 medium base fits common sockets and string-light strands. Rated for indoor and outdoor use, and suitable for damp locations and enclosed fixtures down to -20°C (-4°F). Non-dimmable; do not use with a dimmer. 15,000-hour rated life, sold as a 2-pack, backed by a 1-year limited warranty.

Sized for the spots a full A19 can't reach, this compact A15 brings 500 lumens of warm 3000K soft white to ceiling fans, appliance fixtures and smaller lamps. Each bulb replaces a 50W incandescent on just 7W — and dims smoothly when the room calls for less.

This compact A15 LED is built for ceiling fans, appliance fixtures and smaller lamps where a full A19 won't fit. It replaces a 50W incandescent while drawing only 7W, delivering 500 lumens in a warm, comfortable 3000K soft white. The standard E26 medium base seats in common sockets, and the bulb is fully dimmable so you can ease the output down. Rated for 15,000 hours and sold as a convenient 2-pack, it's backed by a 1-year limited warranty.

Crisp 5000K daylight in a compact A15 — the right fit for fans, fixtures and accent lighting where a full-size bulb won't go. Each one replaces a 50W incandescent on 7W, puts out 500 neutral-white lumens, and dims on standard switches.

This compact A15 LED gives crisp, neutral 5000K daylight for fans, fixtures and accent lighting where a full-size bulb is too large. Each bulb replaces a 50W incandescent on 7W, putting out 500 lumens of clean white light. It seats in any standard E26 medium base on 120V and dims with standard dimmer switches. Sold as a 2-pack.

A direct drop-in for 78 mm R7S double-ended halogen tubes, this linear LED retires a 60W halogen on just 8W — and loses the searing heat that came with it. Its 800 lumens of crisp 5000K daylight bring clean, clear light to floodlights, security and work fixtures.

This R7S J-type linear LED is a direct replacement for 78 mm double-ended halogen tubes, dropping into compatible fixtures without rewiring. It replaces a 60W halogen using only 8W and delivers a bright 800 lumens — all without the intense heat of a halogen linear lamp. The 5000K daylight-white tone gives crisp, clean light for floodlights, security and work fixtures, and the bulb is fully dimmable. Rated for 15,000 hours and sold as a single bulb, it's backed by a 1-year limited warranty.

A direct drop-in for 118 mm R7S double-ended halogen tubes, this linear LED retires a 120W halogen on just 15W — without the searing heat. A powerful 1500 lumens of crisp 5000K daylight floods floodlights, security and work fixtures with clean, clear light.

This R7S J-type linear LED is a direct replacement for 118 mm double-ended halogen tubes, dropping into compatible fixtures without rewiring. It replaces a 120W halogen using only 15W and delivers a powerful 1500 lumens — all without the intense heat of a halogen linear lamp. The 5000K daylight-white tone gives crisp, clean light for floodlights, security and work fixtures, and the bulb is fully dimmable. Rated for 15,000 hours and sold as a single bulb, it's backed by a 1-year limited warranty.

A directional PAR16 spotlight that trades a 40W incandescent for 6W, casting 500 lumens through a 40° beam. Its warm 3000K soft white tone suits accent, track and display lighting — and it dims to the scene.

This PAR16 directional spotlight replaces a 40W incandescent on 6W, putting out 500 lumens through a 40° beam built for accent, track and display lighting. The warm 3000K soft white tone keeps highlighted objects inviting, and it dims to scale the output to the scene. It seats in any standard E26 medium base on 120V and dims with standard switches. Sold as a 2-pack.

Built for high ceilings and large rooms, this BR40 flood replaces a 100W incandescent on just 18W. Its wide beam washes great rooms, kitchens and finished basements evenly with 1500 lumens of warm 3000K soft white — and dims cleanly when evening sets in.

This BR40 floodlight replaces a 100W incandescent flood while drawing only 18W, producing a powerful 1500-lumen wide beam for high ceilings and large rooms. The wide flood beam evenly washes large areas, making it ideal for recessed cans and downlights, while the warm 3000K soft white tone keeps the light comfortable. Its large BR40 reflector shape and standard E26 medium base are a direct fit for 5- and 6-inch recessed fixtures, and the bulb is fully dimmable. Rated for an extra-long 25,000 hours and sold as a single bulb, it's backed by a 1-year limited warranty.

A frosted G25 globe that softens its filament into an even, glare-free glow — 500 lumens of warm 3000K soft white from just 5W in place of a 50W incandescent. At roughly $0.60 a year to run, it brings flattering light to vanity, bathroom and decorative fixtures.

This G25 globe bulb pairs a frosted finish with LED efficiency, replacing a 50W incandescent on just 5W — about $0.60 a year to run. It delivers 500 lumens of warm 3000K soft white, with the frosted glass diffusing the filament for an even, glare-free glow that flatters vanity, bathroom and decorative fixtures on its standard E26 medium base. Fully dimmable on 120V circuits, it's damp-location rated and approved for fully enclosed fixtures, operating down to -20°C. Rated for 15,000 hours — roughly 13.7 years at 3 hours per day — and backed by a 1-year manufacturer warranty against defects.

Built for ceiling fans and small fixtures where a standard bulb won't fit. This compact A15 gives the brightness of a 50W incandescent on 7W — 500 lumens of crisp 5000K daylight, spread across a wide 200° beam — and it dims on demand.

This compact A15 LED is made for ceiling fans and small fixtures where standard bulbs won't fit. On 7W it gives the brightness of a 50W incandescent — 500 lumens — in a crisp 5000K daylight color, spread across a wide 200° beam for kitchens, workspaces and task areas. It dims on 120V with a standard E26 medium base. Suitable for damp locations and fully enclosed fixtures, down to -20°C (-4°F). 15,000-hour rated life; 1-year limited warranty.

A directional GU10 spotlight that swaps a 50W incandescent for 7W, casting 500 lumens of crisp 5000K daylight. Its neutral white tone keeps track, accent and recessed lighting clean and sharp — and the twist-lock base seats securely on 120V, dimming on demand.

This GU10 directional spotlight replaces a 50W incandescent on 7W, putting out 500 lumens of crisp, neutral 5000K daylight for track, accent and recessed lighting. The GU10 twist-lock base seats securely and wires directly to 120V, and the bulb dims with standard dimmer switches. Sold as a single bulb.

One bulb, five colors and an automatic cycling mode — red, blue, green, pink and orange at the flick of an integrated switch. No remote, no app: this energy-efficient 5W A19 sets the mood for parties, holidays and accent lighting straight from a standard E26 socket.

This A19 color-changing LED cycles through five colors — red, blue, green, pink and orange — plus an automatic color-cycling mode, all selected with the bulb's integrated switch. There's no remote or app to manage, making it an easy way to set the mood for parties, holidays and accent lighting. The energy-efficient 5W LED comes in a familiar A19 shape and fits standard E26 medium-base 120V sockets. Rated for 15,000 hours of life and backed by a 1-year warranty.

A direct LED swap for a 50W halogen GU10, drawing just 7W — about $0.84 a year to run. Its 500 lumens of warm 3000K soft white bring an inviting glow to track and recessed accent lighting, and the twist-and-lock base wires straight to 120V with no transformer.

This GU10 spotlight is a direct LED replacement for a 50W halogen, using only 7W — about $0.84 a year to run. It delivers 500 lumens of warm 3000K soft white for track and recessed accent lighting, and its twist-and-lock GU10 base wires directly to 120V with no transformer required. Fully dimmable for adjustable accent and display lighting, it's rated for 15,000 hours — about 13.7 years at 3 hours per day. Damp-location rated and approved for fully enclosed fixtures, it operates to -20°C.

A direct LED swap for a 50W halogen GU10, on 7W. Its 500 lumens of crisp 5000K daylight, through a 40° beam, sharpen kitchens, retail displays and task accents — and the twist-and-lock base wires straight to 120V, no transformer, dimming when the moment calls.

This GU10 spotlight is a direct LED replacement for a 50W halogen, on 7W. It gives 500 lumens of crisp 5000K daylight through a 40° beam — good for kitchens, retail displays and task accents — and its twist-and-lock GU10 base wires directly to 120V with no transformer needed. Dimmable for adjustable accent lighting, with a 15,000-hour rated life. Suitable for damp locations and fully enclosed fixtures, down to -20°C (-4°F). 1-year limited warranty.

A 9-watt A19 that does the work of a 60-watt incandescent. It puts out 800 lumens of 3000K soft white — the warm, settled light of a living room or bedroom — and screws into any standard E26 socket. One bulb, the everyday shape, ready to drop in.

This A19 LED draws 9 watts to replace a 60-watt incandescent, putting out 800 lumens of 3000K soft white — a warm light for living rooms, bedrooms and ambient fixtures. It uses a standard E26 medium base and runs on 120V/60Hz. Rated for 15,000 hours, about 13.7 years at three hours a day. It is damp-location rated, works in fully enclosed fixtures, and operates down to -20°C (-4°F). Note: non-dimmable — do not use with dimmers, timers or photocells.

Four bulbs ready to refresh a whole room: each A19 replaces a 40W incandescent on just 6W, casting 450 lumens of warm 3000K soft white. The familiar shape and standard E26 base make these everyday workhorses for lamps, hallways and ceiling fittings.

This four-pack of A19 LEDs is built for whole-room upgrades — each bulb replaces a 40W incandescent using just 6W, delivering 450 lumens of warm 3000K soft white in the familiar A19 shape. They fit any standard E26 medium-base socket on 120V, making them an easy swap throughout the home. Non-dimmable, they're ideal for everyday fixtures, lamps and hallways. Rated for 15,000 hours and backed by a 1-year warranty, they're damp-location rated and usable in enclosed fixtures down to -20°C.

Four bulbs ready to refresh a whole room: each A19 replaces a 40W incandescent on just 6W, casting 450 lumens of crisp 5000K daylight. That clean, neutral white sharpens kitchens, garages, basements and task areas — all from a standard E26 base.

This four-pack of A19 LEDs is built for whole-room upgrades — each bulb replaces a 40W incandescent using just 6W, delivering 450 lumens of crisp 5000K daylight in the familiar A19 shape. They fit any standard E26 medium-base socket on 120V for an easy swap throughout the home. Non-dimmable, they're ideal for kitchens, garages, basements and task areas where clean, neutral light matters. Rated for 15,000 hours and backed by a 1-year warranty, they're damp-location rated and usable in enclosed fixtures down to -20°C.

A small everyday bulb that earns its keep. This 6-watt A19 gives 450 lumens of 3000K soft white to the lamps and fixtures of your living spaces, and screws into any standard E26 socket. A simple, low-draw upgrade for the lights you use most.

This 6W A19 LED gives 450 lumens of 3000K soft white for living spaces — a warm, everyday light. It seats in any standard E26 medium base on 120V, a direct fit for common household lamps, ceiling fittings and fixtures. Non-dimmable, it runs on far less power than the incandescent it replaces.

A small bulb with a crisp edge. This 6-watt A19 gives 450 lumens of 5000K daylight — the neutral white that keeps kitchens and work areas clear — and screws into any standard E26 socket. A simple, low-draw upgrade where you need to see what you're doing.

This 6W A19 LED gives 450 lumens of 5000K daylight — a crisp, neutral white for kitchens, task and utility areas. It seats in any standard E26 medium base on 120V, a direct fit for common household lamps, fixtures and general interior lighting. Non-dimmable, it cuts energy use without dimming the light.

The warm glow of classic filament style meets modern LED efficiency. Exposed glass filaments cast 800 lumens of 3000K soft white in every direction, replacing a 60W incandescent on just 9W — about $1.08 a year — and dimming smoothly to set the mood.

This Type-A clear filament bulb pairs a vintage look with modern LED efficiency, replacing a 60W incandescent on just 9W — about $1.08 a year to run. Its exposed glass filaments cast 800 lumens of warm 3000K soft white across a full 360° beam angle, for even, all-around light in open and shade fixtures. Fully dimmable on 120V with a standard E26 medium base, it's rated for 15,000 hours of life. Damp-location rated and approved for fully enclosed fixtures, it operates to -20°C.

Vintage filament charm with daylight clarity: exposed glass filaments cast 800 lumens of crisp 5000K daylight in every direction, replacing a 60W incandescent on just 9W. Fully dimmable, it brings sharp, even light to open fixtures and reading nooks alike.

This Type-A clear filament bulb pairs a vintage look with modern LED efficiency, replacing a 60W incandescent on just 9W. Its exposed glass filaments cast 800 lumens of crisp 5000K daylight across a full 360° beam angle, for even light distribution in open fixtures. Fully dimmable on 120V with a standard E26 medium base, it's rated for 15,000 hours of life. Damp-location rated and approved for fully enclosed fixtures, it operates to -20°C.

Two bulbs of warm, inviting filament light with LED efficiency built in. Exposed glass filaments cast 800 lumens of 3000K soft white in every direction, each replacing a 60W incandescent on just 9W — and dimming smoothly to set the ambiance.

This two-pack of Type-A clear filament bulbs pairs vintage styling with modern LED efficiency — each 9W bulb replaces a 60W incandescent. Their exposed glass filaments cast 800 lumens of warm 3000K soft white across a full 360° beam angle, for even, all-around light in open and shade fixtures. Fully dimmable on 120V with a standard E26 medium base, each bulb is rated for 15,000 hours of life. Damp-location rated and approved for fully enclosed fixtures, they operate to -20°C.

Two bulbs of bright daylight energy with vintage filament appeal. Exposed glass filaments cast 800 lumens of crisp 5000K daylight in every direction, each replacing a 60W incandescent on just 9W — fully dimmable, wherever you need clear, even light.

This two-pack of Type-A clear filament bulbs pairs vintage styling with modern LED efficiency — each 9W bulb replaces a 60W incandescent. Their exposed glass filaments cast 800 lumens of crisp 5000K daylight across a full 360° beam angle, for even light distribution in open fixtures. Fully dimmable on 120V with a standard E26 medium base, each bulb is rated for 15,000 hours of life. Damp-location rated and approved for fully enclosed fixtures, they operate to -20°C.

Six bulbs to outfit the home in one go. Each Xtricity clear-filament LED replaces a 60-watt incandescent on just 9 watts — 800 lumens of 3000K soft white through exposed glass filaments. Dimmable, rated for 15,000 hours, and built for the everyday fixtures you live with.

Each bulb in this six-pack draws 9 watts to replace a 60-watt incandescent, giving 800 lumens of 3000K soft white through exposed glass filaments for a classic, vintage look. A 360° beam spreads light around the room. The bulbs are dimmable on 120V with a standard E26 medium base, rated for 15,000 hours, and backed by a one-year warranty. They are damp-location rated, work in fully enclosed fixtures, and operate down to -20°C — for lamps, bathroom fittings and fixtures around the house.

Crisp, true-to-life light for the spaces that demand it. This six-pack of Xtricity clear-filament LEDs replaces a 60-watt incandescent with just 9 watts each — 800 lumens of bright 5000K daylight through exposed glass filaments. Fully dimmable, long-lasting, and ready to outfit the whole home.

Each bulb in this six-pack uses just 9 watts to replace a 60-watt incandescent, delivering 800 lumens of crisp 5000K daylight through exposed glass filaments — ideal for kitchens, home offices and spaces where accurate, energizing light matters. A full 360° beam angle gives even all-around coverage, and the bulbs are fully dimmable on 120V with a standard E26 medium base. Rated for 15,000 hours and backed by a one-year warranty, they are damp-location rated and approved for fully enclosed fixtures, operating down to -20°C.

Soft warmth in a slim, decorative silhouette. The Xtricity Type-S clear-filament LED draws just 6.2 watts to do the work of a 60-watt incandescent, casting 700 lumens of 3000K soft white. Fully dimmable, it lets specialty and decorative fixtures glow at exactly the right level.

This slim Type-S clear-filament bulb is shaped for decorative and specialty fixtures, replacing a 60-watt incandescent with just 6.2 watts. It produces 700 lumens of warm 3000K soft white light and is fully dimmable on 120V with a standard E26 medium base, so vanity strips, specialty lamps and decorative applications can be set to any ambiance. Rated for 15,000 hours, it is damp-location rated and usable in enclosed fixtures down to -20°C — a graceful, energy-efficient upgrade wherever filament style is wanted.

A small capsule for fixtures that show the bulb. The Xtricity G9 bi-pin slips into chandeliers, sconces and accent fittings, replacing a 60-watt halogen on 4.5 watts. It gives 500 lumens of 3000K soft white across a full 360° beam — dimmable, and rated for 25,000 hours.

This compact G9 bi-pin capsule replaces a 60-watt halogen on 4.5 watts, giving 500 lumens of 3000K soft white to chandeliers, wall sconces and accent fixtures that take a G9 base. Its 360° beam throws light in every direction. Dimmable on 120V and rated for 25,000 hours — far longer than the halogen it replaces — so it cuts re-lamping in hard-to-reach specialty fittings. Damp-location rated and usable in enclosed fixtures down to -20°C.

A small capsule with a crisp, cool light. The Xtricity G9 bi-pin replaces a 60-watt halogen on 4.5 watts, giving 500 lumens of 6000K super daylight across a full 360° beam. Dimmable on 120V and rated for 25,000 hours — for task and accent fixtures.

This compact G9 bi-pin capsule replaces a 60-watt halogen on 4.5 watts, giving 500 lumens of 6000K super daylight for crisp task and accent lighting. Its 360° beam throws light in every direction. Dimmable on 120V with a G9 bi-pin base and rated for 25,000 hours — far longer than the halogen it replaces — for pendant lights, wall sconces and accent fixtures. Damp-location rated and usable in enclosed fixtures down to -20°C.

Four capsules — enough to fill a fixture. Each Xtricity G9 bi-pin replaces a 60-watt halogen on 4.5 watts, giving 500 lumens of 3000K soft white across a full 360° beam. Dimmable and rated for 25,000 hours, so you can light a chandelier and leave it for years.

This four-pack of compact G9 bi-pin capsules each replaces a 60-watt halogen on 4.5 watts, giving 500 lumens of 3000K soft white per capsule — enough to fill multi-bulb chandeliers and sconces in one go. Each capsule's 360° beam throws light in every direction. Dimmable on 120V and rated for 25,000 hours, so a whole fixture's worth of lamps can be set and left. Damp-location rated and usable in enclosed fixtures down to -20°C.

Four crisp capsules to light a whole fixture. Each Xtricity G9 bi-pin replaces a 60-watt halogen on 4.5 watts, giving 500 lumens of 6000K super daylight across a full 360° beam. Dimmable on 120V and rated for 25,000 hours.

This four-pack of compact G9 bi-pin capsules each replaces a 60-watt halogen on 4.5 watts, giving 500 lumens of 6000K super daylight per capsule — crisp light for multi-bulb chandeliers, sconces and specialty fixtures. Each capsule's 360° beam throws light in every direction. Dimmable on 120V and rated for 25,000 hours, so you can re-lamp a whole fitting at once. Damp-location rated and usable in enclosed fixtures down to -20°C.

Low-voltage warmth, built small. The Xtricity G4 bi-pin runs on 12V and replaces a 25-watt halogen on 2.5 watts, giving 250 lumens of 3000K soft white across a full 360° beam. Rated for 25,000 hours, it tucks into under-cabinet and accent fittings and keeps glowing.

This low-voltage 12V G4 bi-pin capsule replaces a 25-watt halogen on 2.5 watts, giving 250 lumens of 3000K soft white for under-cabinet and accent fixtures. Its 360° beam throws light in every direction. It is non-dimmable and runs only on 12V circuits with a G4 bi-pin base, so it must be matched to a compatible low-voltage system. Rated for 25,000 hours, damp-location rated, usable in fully enclosed fixtures, and operates down to -20°C — a durable, efficient swap for halogen capsules in damp-location-rated low-voltage fittings.

A slim filament tube on a candelabra base. This Type-T6 LED replaces a 25W incandescent on just 2W, casting 200 lumens of warm 3000K soft white. Dimmable on 120V, it brings a quiet filament glow to decorative, sign and showcase fixtures.

A slim tubular Type-T6 clear-filament bulb on an E12 candelabra base. It replaces a 25W incandescent on just 2W, giving 200 lumens of warm 3000K soft white for decorative, sign and showcase fixtures. Dimmable on 120V (it may not work with every dimmer), with a 15,000-hour rated life. Suitable for damp locations and enclosed fixtures down to -20°C (-4°F). Backed by a 1-year limited warranty.

A slim filament tube on an intermediate base. This Type-T6 LED replaces a 25W incandescent on just 2W, casting 200 lumens of warm 3000K soft white. Dimmable on 120V, it's the low-draw choice for appliance, sign and decorative fixtures that take an E17 base.

A slim tubular Type-T6 clear-filament bulb on an E17 intermediate base. It replaces a 25W incandescent on just 2W, giving 200 lumens of warm 3000K soft white for appliance, sign and decorative fixtures. Dimmable on 120V (it may not work with every dimmer), with a 15,000-hour rated life. Suitable for damp locations and enclosed fixtures down to -20°C (-4°F). Backed by a 1-year limited warranty.

Light that turns itself on. This Xtricity A19 has a built-in motion sensor — it detects movement up to 1.5 m across a 120° field and switches on, no wiring or extra switches. Screw it into any E26 socket, indoors or out. 9 watts give the brightness of a 60-watt bulb in warm 3000K, for about $1.08 a year.

This A19 bulb has a built-in motion sensor that detects movement up to 1.5 m across a 120° detection angle and switches on automatically — hands-free light for entryways, closets, garages, stairwells and outdoor spots, with no wiring, switches or extra hardware. Screw it into any standard E26 socket, indoors or outdoors, and it works instantly. At 9 watts it gives the brightness of a 60-watt incandescent — 800 lumens of warm 3000K soft white — at about $1.08 a year, with a 25,000-hour rated life (about 22.8 years at three hours a day). Damp-location rated and operates down to -20°C. Important: non-dimmable — do not pair with a dimmer or use in fully enclosed fixtures.

Sunlight by day, firefly glow by night. This solar light lives inside a crackled glass jar that scatters its warm 3000K soft white into an enchanting, twinkling shimmer. The battery charges in an afternoon and lasts through the night — no wiring, no running costs, just open the lid and switch it on.

This 5-inch solar light houses an LED inside a crackled glass jar whose textured surface and 3000K soft white glow create a cozy, twinkling firefly effect. Its solar battery recharges in one afternoon — about six hours in direct sunlight on a sunny day — and lasts through the night, with no bulbs to replace and up to 25,000 hours of LED life for long-term, low-maintenance use. A replaceable 14450 lithium-ion battery is included. Wet-location rated, it is safe to install and use on open-air decks and patios. To operate, open the lid and switch ON/OFF to ON; charge for 12 hours before first use. Measures 5.1 x 5 x 5.6 in; 0.05W, 1.2V, 3000K.

Made to fit where standard bulbs won't. This compact A15 filament LED is built for ceiling fans and small fixtures, drawing 5.5 watts to match a 50-watt incandescent. 500 lumens of 3000K soft white across a wide 300° beam, in a two-pack — light for the home's tight spots.

This two-pack of compact A15 filament LEDs is built for ceiling fans and small fixtures where a standard bulb won't fit. Each draws 5.5 watts to give the brightness of a 50-watt incandescent — 500 lumens of 3000K soft white across a wide 300° beam. The bulbs are non-dimmable, with a standard E26 medium base on 120V, and rated for 15,000 hours. Damp-location rated and usable in enclosed fixtures down to -20°C — for fans, fridges and other compact fittings.

Crisp daylight in a bulb that actually fits. This compact A15 filament LED is built for ceiling fans and small fixtures, drawing 5.5 watts to match a 50-watt incandescent. 500 lumens of 5000K daylight across a wide 300° beam, in a handy two-pack — sharp light for the home's tight spots.

This two-pack of compact A15 filament LEDs is built for ceiling fans and small fixtures where a standard bulb won't fit. Each draws 5.5 watts to give the brightness of a 50-watt incandescent — 500 lumens of crisp 5000K daylight across a wide 300° beam, good for fan fixtures, appliances and workspaces. The bulbs are non-dimmable, with a standard E26 medium base on 120V, and rated for 15,000 hours. Damp-location rated and usable in enclosed fixtures down to -20°C.

Serious light, vintage look. This high-output clear-filament LED replaces a 75-watt incandescent with just 12 watts, pouring out 1100 bright lumens of warm 3000K soft white through exposed glass filaments. Fully dimmable and sold as a two-pack — the modern way to light a demanding space.

This two-pack of high-output clear-filament LEDs replaces a 75-watt incandescent with just 12 watts each, producing a bright 1100 lumens of warm 3000K soft white light through exposed glass filaments — vintage look, modern efficiency. The bulbs are fully dimmable on 120V with a standard E26 medium base and rated for 15,000 hours each. Damp-location rated and approved for fully enclosed fixtures, operating down to -20°C, they suit lamps, open fixtures and any space that needs strong, warm light.

High output, crisp clarity. This clear-filament LED replaces a 75-watt incandescent on 12 watts, pushing 1100 lumens of 5000K daylight through exposed glass filaments across a wide 300° beam. Good for kitchens and workspaces, dimmable when you want it softer — sold as a two-pack.

This two-pack of high-output clear-filament LEDs replaces a 75-watt incandescent with 12 watts each, giving 1100 lumens of crisp 5000K daylight through exposed glass filaments across a wide 300° beam — good for kitchens and workspaces. The bulbs are dimmable on 120V with a standard E26 medium base and rated for 15,000 hours each. Damp-location rated and approved for fully enclosed fixtures, operating down to -20°C — high brightness with the option to dim down.

Six bulbs, one warm glow throughout the home. Each clear-filament LED replaces a 75-watt incandescent on 12 watts, casting 1100 lumens of 3000K soft white through exposed glass filaments across a wide 300° beam. Dimmable and rated for 15,000 hours — the easy way to light every room at once.

This six-pack of high-output clear-filament LEDs lets you re-lamp the whole home at once: each 12-watt bulb replaces a 75-watt incandescent and gives 1100 lumens of 3000K soft white through exposed glass filaments across a wide 300° beam. The bulbs are dimmable on 120V with a standard E26 medium base and rated for 15,000 hours each. Damp-location rated and approved for fully enclosed fixtures, operating down to -20°C — for lamps, open fixtures and general room lighting throughout the house.

Six bulbs of crisp, clear daylight. Each clear-filament LED replaces a 75-watt incandescent on 12 watts, casting 1100 lumens of 5000K daylight through exposed glass filaments across a wide 300° beam. Dimmable and rated for 15,000 hours — outfit the whole home in one box.

This six-pack of high-output clear-filament LEDs makes it easy to light the whole home: each 12-watt bulb replaces a 75-watt incandescent and gives 1100 lumens of crisp 5000K daylight through exposed glass filaments across a wide 300° beam. The bulbs are dimmable on 120V with a standard E26 medium base and rated for 15,000 hours each. Damp-location rated and approved for fully enclosed fixtures, operating down to -20°C — for workshops, garages, task lighting and anywhere clear visibility matters.

Big-room warmth without the big-room draw. This A21 clear-filament LED replaces a 100-watt incandescent on 16 watts, filling a space with 1600 lumens of 3000K soft white across a wide 300° beam, in a larger globe. Dimmable, sold as a two-pack — built for high ceilings and open fixtures.

This two-pack of A21 clear-filament LEDs replaces a 100-watt incandescent on 16 watts each, giving 1600 lumens of 3000K soft white in a larger A21 globe across a wide 300° beam — for high-ceiling rooms and open fixtures. The bulbs are dimmable on 120V with a standard E26 medium base and rated for 15,000 hours each. Damp-location rated and approved for fully enclosed fixtures, operating down to -20°C — strong, even light with the option to dim down.

Maximum daylight, minimal compromise. This A21 clear-filament LED replaces a 100-watt incandescent on 16 watts, flooding a space with 1600 lumens of 5000K daylight across a wide 300° beam, in a larger globe. Dimmable, sold as a two-pack — for garages, kitchens and high-ceiling rooms.

This two-pack of A21 clear-filament LEDs replaces a 100-watt incandescent on 16 watts each, giving 1600 lumens of crisp 5000K daylight in a larger A21 globe across a wide 300° beam — for garages, kitchens and high-ceiling spaces. The bulbs are dimmable on 120V with a standard E26 medium base and rated for 15,000 hours each. Damp-location rated and approved for fully enclosed fixtures, operating down to -20°C — a lot of clean, bright light with the option to dim when needed.

Stock up and never scramble for a spare. This ten-pack puts a 3000K warm glow in every socket — each 9-watt A19 replaces a 60-watt incandescent with 800 lumens in the familiar shape. Non-dimmable, E26, built for everyday lamps, hallways and bulk replacement.

This contractor-friendly ten-pack keeps a reliable A19 replacement always on hand: each 9-watt bulb replaces a 60-watt incandescent with 800 lumens of 3000K soft white in the familiar A19 shape, spread across a 180° beam. The bulbs fit any standard E26 medium-base socket on 120V and are non-dimmable — for everyday lamps, hallways and bulk fixture replacement. Rated for 15,000 hours and backed by a one-year warranty, a cost-effective way to outfit every room at once.

Crisp daylight, bought by the ten. This ten-pack drops a clean 5000K glow into every socket — each 9-watt A19 replaces a 60-watt incandescent with 800 lumens. Non-dimmable, E26, good for garages, basements and workspaces.

This contractor-friendly ten-pack keeps a reliable daylight A19 always on hand: each 9-watt bulb replaces a 60-watt incandescent with 800 lumens of 5000K daylight in the familiar A19 shape, spread across a 180° beam — good for garages, basements and workspaces. The bulbs fit any standard E26 medium-base socket on 120V and are non-dimmable, for bulk fixture replacement. Rated for 15,000 hours and backed by a one-year warranty, they upgrade every utility space at once.

Soft, dimmable warmth in a ten-pack for the whole house. Each 9.5-watt A19 replaces a 60-watt incandescent with 800 lumens of 3000K soft white. Dimmable on 120V with an E26 base — set the mood in any room and keep the spares on the shelf.

This contractor-friendly ten-pack of dimmable A19s replaces a 60-watt incandescent with each 9.5-watt bulb, giving 800 lumens of 3000K soft white in the familiar A19 shape, spread across a 180° beam. The bulbs are dimmable on 120V with a standard E26 medium base, so they work with standard dimmers throughout the home, from bedrooms to living rooms. Rated for 15,000 hours and backed by a one-year warranty — a dependable, mood-setting upgrade bought in bulk.

Dimmable daylight, ten to a box. Each 9.5W A19 replaces a 60W incandescent with 800 lumens of clean 5000K light. Dimmable on 120V with an E26 base — built for garages, kitchens and workspaces, with spares always on the shelf.

A contractor-friendly ten-pack of dimmable A19s. Each 9.5W bulb replaces a 60W incandescent with 800 lumens of crisp 5000K daylight in the familiar A19 shape — built for garages, kitchens and workspaces. The bulbs are dimmable on 120V with a standard E26 medium base, working with standard dimmers throughout the home. Rated for 15,000 hours and backed by a 1-year warranty, they keep a reliable supply of bright, adjustable light on hand.

A six-pack of A19 LEDs that put out the light of a 100-watt incandescent on 12 watts. Each one gives 1100 lumens of warm 3000K soft white in the familiar A19 shape — enough to cover the rooms you use most, for about $1.45 a year per bulb. Non-dimmable, standard E26 base.

This six-pack of 12-watt A19 LEDs gives 1100 lumens each of warm 3000K soft white in the familiar A19 shape, replacing a 100-watt incandescent on a fraction of the power — about $1.45 a year per bulb. The bulbs fit any standard E26 medium-base socket on 120V and are non-dimmable, which makes them a straightforward choice for replacing several fixtures at once or covering high-traffic rooms. A 180° beam spreads the light wide, and the 15,000-hour rated life keeps lamps, overhead fixtures and general-purpose sockets lit for years. Do not use with a dimmer switch.

A six-pack of A19 LEDs that throw the light of a 100-watt incandescent on 12 watts. Each gives a crisp 1100-lumen daylight glow at 5000K, in the standard E26 base that fits the lamps and fixtures you already own — for about $1.45 a year per bulb.

This six-pack of A19 bulbs gives a bright 1100-lumen daylight glow (5000K) from just 12 watts, replacing a 100-watt incandescent on a fraction of the energy — about $1.45 a year per bulb. The standard E26 medium base drops into the lamps, fixtures and household sockets you already own, and a 180° beam spreads the light wide. Rated for 15,000 hours (roughly 13.7 years at three hours a day), it suits damp locations and fully enclosed fixtures down to -20°C (-4°F). Non-dimmable: do not use with dimmer switches, timers, photocells or emergency exit fixtures.

A six-pack of dimmable A19 LEDs in warm 3000K soft white. Each gives 1100 lumens — the light of a 100-watt incandescent on 12 watts — and dials from bright task light down to a soft evening glow, for about $1.45 a year per bulb.

This six-pack of A19 bulbs gives a warm 1100-lumen soft white glow (3000K) from just 12 watts, replacing a 100-watt incandescent on a fraction of the energy — about $1.45 a year per bulb. Each bulb dims from bright task light down to a soft evening glow, and the standard E26 medium base drops into the lamps, fixtures and household sockets you already own. A 180° beam spreads the light wide, and the 15,000-hour rated life works out to roughly 13.7 years at three hours a day. Rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). May not be compatible with every dimmer; not for use with timers, photocells or emergency exit fixtures.

A six-pack of dimmable A19 LEDs in crisp 5000K daylight. Each gives 1100 lumens — the light of a 100-watt incandescent on 12 watts — and dials from sharp task light down to a relaxed lower setting, for about $1.45 a year per bulb.

This six-pack of A19 bulbs gives a bright 1100-lumen daylight glow (5000K) from just 12 watts, replacing a 100-watt incandescent on a fraction of the energy — about $1.45 a year per bulb. Each bulb dims from crisp task light down to a relaxed lower setting, and the standard E26 medium base drops into the lamps, fixtures and household sockets you already own. A 180° beam spreads the light wide, and the 15,000-hour rated life works out to roughly 13.7 years at three hours a day. Rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). May not be compatible with every dimmer; not for use with timers, photocells or emergency exit fixtures.

A single A19 LED in warm 3000K soft white. Just 12 watts give 1100 lumens — the light of a 100-watt incandescent — and the standard E26 base drops it into the lamps and fixtures you already own, for about $1.45 a year.

This single A19 bulb gives a warm 1100-lumen soft white glow (3000K) from just 12 watts, replacing a 100-watt incandescent on a fraction of the energy — about $1.45 a year. The standard E26 medium base drops into the lamps, fixtures and household sockets you already own, and a 180° beam spreads the light wide. Rated for 15,000 hours (roughly 13.7 years at three hours a day), it suits living spaces, lamps and fixtures throughout the home, and it is rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). Non-dimmable: do not use with dimmer switches, timers, photocells or emergency exit fixtures.

A single A19 LED in crisp 5000K daylight. Just 12 watts give 1100 lumens — the light of a 100-watt incandescent — and the standard E26 base drops it into the lamps and fixtures you already own, for about $1.45 a year.

This single A19 bulb gives a bright 1100-lumen daylight glow (5000K) from just 12 watts, replacing a 100-watt incandescent on a fraction of the energy — about $1.45 a year. The standard E26 medium base drops into the lamps, fixtures and household sockets you already own, and a 180° beam spreads the light wide. Rated for 15,000 hours (roughly 13.7 years at three hours a day), its crisp daylight suits kitchens, bathrooms, workspaces and task areas, and it is rated for damp locations and fully enclosed fixtures down to -20°C (-4°F). Non-dimmable: do not use with dimmer switches, timers, photocells or emergency exit fixtures.

A slender clear T6 filament that shows the bulb, not just the light. Two watts give 200 lumens of crisp 5000K daylight, dimmable, in chandeliers, sconces and decorative lamps where the filament sits on display.

This Xtricity T6 filament bulb pairs a clear, decorative tube with LED efficiency. At just 2 watts it gives 200 lumens of crisp 5000K daylight and replaces a 25W incandescent, with a clear filament look that suits both period-styled and contemporary fixtures. The slender T6 shape and E12 long candelabra base fit chandeliers, sconces and decorative lamps, and the bulb dims for adjustable ambiance. Rated for 15,000 hours on 120V, it gives long, dependable service in the fixtures where its filament is on display.

A slender clear T6 filament for E17 intermediate-base fixtures. Two watts give 200 lumens of crisp 5000K daylight, dimmable, in a shape that fits the appliance and decorative sockets standard bulbs miss.

This Xtricity T6 filament bulb brings LED light to E17 intermediate-base fixtures that need a slender shape. At just 2 watts it gives 200 lumens of crisp 5000K daylight and replaces a 25W incandescent, with a clear filament look that keeps the bulb decorative. Dimmable on 120V, it fits appliance, accent and decorative fixtures, and its 15,000-hour rated life means long, dependable service in the intermediate-base sockets standard bulbs leave behind.

Vivid blue light from a clear filament-style A19 — an instant mood with no gels or filters. At just 4.5 watts and dimmable, it turns parties, stage sets, aquariums and gaming rooms into a scene, and its standard E26 base drops into the lamps you already own.

This Xtricity A19 color filament bulb casts a vivid blue light straight from a clear, filament-style LED — no gels or filters required to set the mood. Drawing just 4.5 watts, it's an energy-sipping way to bring drama to stage lighting, parties, weddings, aquariums, nightclubs, bars, studios and gaming rooms. A wide 300° beam and standard E26 medium base mean it fits ordinary household lamps and fixtures, while dimmable operation on 120V lets you fine-tune the intensity. With a 15,000-hour rated life, the atmosphere lasts well past the last event.

Vivid green light from a clear filament-style A19 — an instant mood with no gels or filters. At just 4.5 watts and dimmable, it sets the scene for parties, stage sets, aquariums and gaming rooms, and its standard E26 base drops into the lamps you already own.

This Xtricity A19 color filament bulb casts a vivid green light straight from a clear, filament-style LED — no gels or filters required to set the mood. Drawing just 4.5 watts, it brings bold color to stage lighting, parties, weddings, aquariums, nightclubs, bars, studios and gaming rooms. A wide 300° beam and standard E26 medium base mean it fits ordinary household lamps and fixtures, while dimmable operation on 120V lets you fine-tune the intensity. Built for a 15,000-hour rated life, it's specialty lighting that's also built to last.

Vivid yellow light from a clear filament-style A19 — an instant mood with no gels or filters. At just 4.5 watts and dimmable, it brings a festive, golden energy to parties, weddings, aquariums and gaming rooms, dropping straight into the lamps you already own.

This Xtricity A19 color filament bulb casts a vivid yellow light straight from a clear, filament-style LED — no gels or filters required to set the mood. Drawing just 4.5 watts, it's a creative, eye-catching choice for stage lighting, parties, weddings, aquariums, nightclubs, bars, studios and gaming rooms. A wide 300° beam and standard E26 medium base mean it fits ordinary household lamps and fixtures, while dimmable operation on 120V lets you fine-tune the intensity. With a 15,000-hour rated life, the yellow ambiance keeps going event after event.

One PAR16 flood, three light settings. Switch between warm 3000K, neutral 4000K and daylight 5000K to suit the room, while just 5.5 watts give a 500-lumen wide 40° beam. Dimmable, with CRI 80 color that keeps art and displays looking true.

The Xtricity PAR16 puts three selectable color temperatures in one flood bulb — warm 3000K, neutral 4000K or daylight 5000K — so one bulb suits any room. At just 5.5 watts it gives 500 lumens through a wide 40° flood beam, replacing a 40W halogen, and its CRI 80 rendering keeps colors true. Dimmable on standard 120V circuits with an E26 medium base, it works for accent and wash lighting in recessed cans and track heads. A 25,000-hour rated life keeps the light going wherever it's installed.

One bulb, three color choices — dial in warm 3000K, neutral 4000K or crisp 5000K to suit the room. Just 7 watts deliver 500 lumens, the brightness of a 50W incandescent, through a focused 40° beam that highlights features without flooding the space.

The Xtricity PAR20 reflector gives you three selectable color temperatures in one bulb — warm 3000K, neutral 4000K or crisp 5000K — so you can tune the light to any room. At just 7 watts it produces 500 lumens, the brightness of a 50W incandescent, through a focused 40° beam built for accent, track and recessed lighting that highlights rather than floods. Fully dimmable on standard 120V dimmers, it offers adjustable mood and task light, and its standard E26 medium base drops straight into existing PAR20 fixtures with no adapter needed.

One bulb, three color choices — choose warm 3000K, neutral 4000K or crisp 5000K to match the space. Just 11 watts produce 800 lumens, the punch of a 75W incandescent, through a focused 40° beam that directs light exactly where you want it.

The Xtricity PAR30 reflector puts three selectable color temperatures in one bulb — warm 3000K, neutral 4000K or crisp 5000K — to match the mood of any room or display. At just 11 watts it produces 800 lumens, the punch of a 75W incandescent, while sipping power, and its focused 40° beam is built for track, recessed and accent lighting that directs light where you want it. Fully dimmable on standard 120V dimmers for adjustable ambiance, it fits existing PAR30 fixtures through a standard E26 medium base with no rewiring required.

One bulb, three color choices — warm 3000K, neutral 4000K or crisp 5000K, switchable to suit the setting. Just 14 watts deliver a bright 1000 lumens, equivalent to a 90W floodlight, through a focused 40° beam built for high-output directional lighting.

The Xtricity PAR38 reflector delivers three selectable color temperatures in one bulb — warm 3000K, neutral 4000K or crisp 5000K, switchable to suit the setting. At just 14 watts it produces a bright 1000 lumens, equivalent to a 90W incandescent floodlight, on far less energy. Its focused 40° beam is built for high-output directional lighting — accenting, track and recessed applications. Fully dimmable on standard 120V dimmers, it fits any existing PAR38 fixture through a standard E26 medium base, making it a high-performance upgrade for retail displays, architectural accents and covered flood lighting.

One MR16 spotlight, three light moods — warm 3000K, neutral 4000K or daylight 5000K, switchable to match the setting. Just 7 watts throw a bright 500 lumens with true-to-life CRI 80 color, engineered for the 12V low-voltage fixtures where precision counts.

The Xtricity MR16 spotlight brings three selectable color temperatures to low-voltage lighting — warm 3000K, neutral 4000K or daylight 5000K — so a single bulb adapts to any setting. At just 7 watts it delivers a bright 500 lumens, replacing a 50W halogen, with CRI 80 rendering for natural, true-to-life color. Its 12V GU5.3 bi-pin base is built for track, landscape and recessed low-voltage fixtures, and the bulb is fully dimmable for adjustable accent light. With a very long 25,000-hour rated life, it's one of the most durable upgrades you can make to a low-voltage system.

One GU10 spotlight, three light settings — warm 3000K, neutral 4000K or daylight 5000K to suit the room. Just 7 watts give 500 lumens through a focused 70° beam with CRI 80 color, and the twist-lock base drops straight into line-voltage track and recessed fixtures — no transformer.

The Xtricity GU10 spotlight offers three selectable color temperatures in one bulb — warm 3000K, neutral 4000K or daylight 5000K — to suit any room. At just 7 watts it gives 500 lumens through a focused 70° beam, replacing a 40W incandescent, with CRI 80 rendering for true-to-life color. Its GU10 twist-lock base is built for line-voltage track and recessed accent fixtures and needs no transformer, and it dims on 120V for full control of the light. A 25,000-hour rated life keeps the accent lighting consistent at home, in the office or in hospitality settings.

Five color temperatures in one bulb — from cozy 2700K to cool 6500K daylight — give you total command of a room's mood. Just 10 watts replace a 60W incandescent at 800 lumens, and a GU24 twist-lock base makes it the flexible upgrade for energy-saving fixtures.

This Xtricity GU24 LED bulb offers five selectable color temperatures in one — 2700K, 3000K, 4000K, 5000K and 6500K — giving you complete control over the ambiance of any room, from cozy warm to cool daylight. At just 10 watts it replaces a 60W incandescent, delivering 800 lumens through a wide 180° beam for broad, even room coverage. The GU24 twist-lock base fits energy-saving fixtures on 120V, and the bulb is dimmable with standard dimmer switches, making it a versatile, fine-tunable choice for homes, restaurants, offices and retail spaces.

Three color temperatures in one everyday bulb — 3000K soft white, 4000K or 5000K — let you tune the light to any mood. Just 6 watts replace a 40W incandescent at 450 lumens, dimmable for the moment, in a two-pack that fits lamps and fixtures throughout the home.

This Xtricity A19 LED offers three selectable color temperatures in one bulb — 3000K soft white, 4000K or 5000K — to match the mood of any room. At just 6 watts it replaces a 40W incandescent, delivering 450 lumens through a wide 180° beam for broad, even room coverage. The standard E26 medium base fits ordinary lamps and fixtures on 120V, and the bulb is dimmable with standard dimmer switches for full control. Supplied as a two-pack, it's an efficient, flexible everyday upgrade for lighting throughout the home.

Three color temperatures in one full-bright bulb — 3000K soft white, 4000K or 5000K — to match any room or task. Just 10 watts replace a 60W incandescent at 800 lumens, dimmable for the moment, in a two-pack made for everyday household fixtures.

This Xtricity A19 LED delivers three selectable color temperatures in one bulb — 3000K soft white, 4000K or 5000K — so a single bulb suits any room or task. At just 10 watts it replaces a 60W incandescent, producing 800 lumens through a wide 180° beam for broad, even coverage. The standard E26 medium base fits ordinary household fixtures on 120V for universal compatibility, and the bulb is dimmable with standard dimmer switches. Supplied as a two-pack, it's a durable, flexible upgrade for full-brightness lighting throughout the home.

One bulb, three brightness levels. An integrated switch lets you select 2W, 8W or 15W on the fly — up to 1500 lumens of warm 2700K glow that replaces a 100W incandescent. Also dimmable for fine control, and it sips power: just $1.81 a year even at full output.

The Xtricity Tri-Light A19 puts three brightness levels in a single bulb: an integrated switch lets you select 2W, 8W or 15W on the fly, scaling up to 1500 lumens at the highest setting. Every level emits a warm 2700K soft white glow, and at full output it replaces a 100W incandescent while costing an estimated $1.81 a year to run. Beyond the three preset levels it's also dimmable for fine ambiance control, and its standard E26 medium base fits ordinary fixtures on 120V. With a 15,000-hour rated life, it's the smart, versatile choice for bedrooms, living rooms and any space where ambiance matters.

8000 lumens of 5000K daylight from a single 80W LED — enough to light a garage, workshop or basement from one socket. Three LED panels spread the light across the space, and a built-in motion sensor switches it on the moment you walk in.

The Xtricity LED garage light puts 8000 lumens of 5000K daylight into large workspaces from a single 80W LED. Three LED panels spread the light across the room, and a built-in motion sensor turns it on automatically when you walk in — no switch to reach for. A remote control is included, and the standard E26 base screws into a common socket on 120V with no special wiring. Rated for damp locations, it must be used in open luminaires only and is non-dimmable — do not pair it with a dimmer switch.

An amber-yellow A19 that draws far fewer flying insects than a white bulb, so porches, patios and entryways stay comfortable on summer evenings. Just 5 watts, with a 360° spread that lights all around, and it dims to set the mood in the fixtures you already have.

The Xtricity A19 bug light casts an amber-yellow glow that flying insects find far less attractive than ordinary white bulbs, helping keep porches, patios and entryways comfortable on summer evenings. At just 5 watts it's an efficient LED rated for 400 lumens, with a 360° beam that spreads light evenly all around — useful coverage for open outdoor fixtures. The standard E26 medium base fits ordinary outdoor and household sockets, and it dims on 120V to soften the light for relaxed evenings. A 15,000-hour rated life keeps it working season after season.

Saturated blue light for parties, holidays, sports nights and decorative accents — no gels or filters needed. An energy-efficient 5W A19 in a familiar bulb shape, it screws into the lamps and fixtures you already own and lasts a long 15,000 hours.

The Xtricity 5W blue A19 LED turns any medium-base fixture into a colored accent light, casting saturated blue with no gels or filters required. It's a natural fit for parties, holidays, sports nights and decorative displays, with an energy-efficient draw and a familiar A19 bulb shape that screws into ordinary lamps and fixtures via its standard E26 base. Non-dimmable, it delivers steady, vibrant color, and a long 15,000-hour rated life keeps the atmosphere going event after event.

Saturated red light for parties, holidays, sports nights and decorative accents — no gels or filters needed. An energy-efficient 5W A19 in a familiar bulb shape, it screws into the lamps and fixtures you already own and lasts a long 15,000 hours.

The Xtricity 5W red A19 LED brings bold red color to any medium-base fixture, casting saturated light with no gels or filters required. It's a natural fit for parties, holidays, sports nights, themed events and decorative displays, with an energy-efficient draw and a familiar A19 bulb shape that screws into ordinary lamps and fixtures via its standard E26 base. Non-dimmable, it delivers steady, vibrant color, and a long 15,000-hour rated life keeps it going event after event.

Saturated green light for parties, holidays, sports nights and decorative accents — no gels or filters needed. An energy-efficient 5W A19 in a familiar bulb shape, it screws into the lamps and fixtures you already own and lasts a long 15,000 hours.

The Xtricity 5W green A19 LED adds vibrant green color to any medium-base fixture, casting saturated light with no gels or filters required. It's a natural choice for parties, holidays, sports nights, seasonal displays and decorative lighting, with an energy-efficient draw and a familiar A19 bulb shape that screws into ordinary lamps and fixtures via its standard E26 base. Non-dimmable, it delivers steady, reliable color, and a long 15,000-hour rated life means dependable colored light wherever you need it.

Saturated yellow light for parties, holidays, sports nights and decorative accents — no gels or filters needed. An energy-efficient 5W A19 in a familiar bulb shape, it screws into the lamps and fixtures you already own and lasts a long 15,000 hours.

The Xtricity 5W yellow A19 LED brings a cheerful golden hue to any medium-base fixture, casting saturated color with no gels or filters required. It's ideal for parties, holidays, sports nights, wedding décor and colorful seasonal displays, with an energy-efficient draw and a familiar A19 bulb shape that screws into ordinary lamps and fixtures via its standard E26 base. Non-dimmable, it delivers steady, eye-catching color, and a long 15,000-hour rated life makes it colored LED performance you can count on.

A warm PAR20 flood that washes accent and display areas in soft 3000K light. Just 7 watts give 500 lumens through a 40° beam — the look of a 50W halogen on a fraction of the energy, dimmable to set the level you want.

The Xtricity PAR20 flood gives 500 lumens of warm 3000K soft white from just 7 watts, replacing a 50W halogen with a 40° wide beam. It suits accent, display and track lighting — retail displays, recessed cans and track heads — wherever a controlled wash of light is wanted. Dimmable on standard 120V circuits with an E26 medium base, it gives full control of the light, and a 25,000-hour rated life keeps it dependable over the long run.

A daylight PAR20 flood that brings crisp 5000K light to track and recessed fixtures. Just 7 watts give 500 lumens through a 40° beam — the look of a 50W halogen on a fraction of the energy, dimmable to suit the space.

The Xtricity PAR20 flood in 5000K daylight gives 500 lumens from just 7 watts, replacing a 50W halogen with a 40° wide beam. It suits accent, display and task lighting — retail display, gallery-style recessed and track systems — wherever crisp, cool light is wanted. Dimmable on standard 120V circuits with an E26 medium base, it gives full control of the light, and a 25,000-hour rated life means fewer replacements and steady performance.

A warm PAR30 flood for larger recessed and track fixtures. Just 11 watts give 800 lumens through a 40° beam in soft white 3000K — the punch of a 75W halogen, dimmable to set the level you want.

The Xtricity PAR30 flood gives 800 lumens of warm 3000K soft white from just 11 watts, replacing a 75W halogen with a 40° wide beam sized for recessed cans and track heads. Built for accent and wash lighting, it covers homes, offices and retail settings. Dimmable on standard 120V circuits with an E26 medium base, it gives full control of the light, and a 25,000-hour rated life makes it a sound long-term choice.

A daylight PAR30 flood for larger track and recessed installations. Just 11 watts give 800 lumens through a 40° beam in crisp 5000K daylight — the punch of a 75W halogen, dimmable to suit the space.

The Xtricity PAR30 flood in 5000K daylight gives 800 lumens from just 11 watts, replacing a 75W halogen with a 40° wide beam sized for recessed cans and track heads. Built for accent and wash lighting in recessed, track and display applications, it brings crisp, even light to demanding spaces. Dimmable on standard 120V circuits with an E26 medium base, it gives full control of the light, and a 25,000-hour rated life keeps performance steady over time.

A high-output warm PAR38 flood for indoor and outdoor use, weatherproof and rated for wet locations. Just 18.5 watts give 1400 lumens through a 40° beam in soft white 3000K — the punch of a 100W halogen, dimmable for security, landscape and covered-porch lighting.

The Xtricity PAR38 flood gives 1400 lumens of warm 3000K soft white from just 18.5 watts, replacing a 100W halogen with a 40° wide beam. It's weatherproof and rated for wet locations, suitable for both indoor and outdoor use — security, landscape and covered-porch lighting, down to -20°C (-4°F). Dimmable on standard 120V circuits with an E26 medium base, it gives full control of the light, and a 25,000-hour rated life makes it one of the most durable, high-output options in the PAR38 format.

A high-output daylight PAR38 flood for indoor and outdoor use, weatherproof and rated for wet locations. Just 18.5 watts give 1400 lumens through a 40° beam in crisp 5000K daylight — the punch of a 100W halogen, dimmable for security and landscape lighting.

The Xtricity PAR38 flood in 5000K daylight gives 1400 lumens from just 18.5 watts, replacing a 100W halogen with a 40° wide beam. It's weatherproof and rated for wet locations, suitable for both indoor and outdoor use — security lighting, landscape spotlights and covered-porch flood applications, down to -20°C (-4°F). Dimmable on standard 120V circuits with an E26 medium base, it gives full control of the light, and a 25,000-hour rated life makes it one of the most durable, high-output options in the PAR38 format.

The intimate glow of a smoked-glass candle bulb, with a vintage filament look and an ultra-warm 2200K amber light — pure ambiance. Just 3.5 watts cast a cozy 250-lumen glow, dimmable for full control, with an E12 candelabra base made for chandeliers and decorative fixtures.

The Xtricity Type C candle bulb pairs smoked glass with a vintage filament look and an ultra-warm 2200K amber glow — decorative warmth that's all ambiance. At just 3.5 watts it produces a cozy 250 lumens, the intimate light of Edison-style illumination without the heat or energy draw of incandescent. Fully dimmable for complete control of the mood, it fits chandeliers and decorative fixtures through its E12 candelabra base and runs on 120V. With a 15,000-hour rated life, it's the long-lasting candle bulb for chandeliers, wall sconces and decorative fixtures.

A 12-volt A-type bulb for places that run off battery and solar — RVs, boats and off-grid systems. Just 10 watts give 800 lumens of soft white 3000K through a wide 220° spread, the look of a 60W incandescent, with a standard E26 base for an easy swap.

The Xtricity Type A bulb runs on 12V low voltage, built for RVs, boats, off-grid solar systems and other 12V DC fixtures. At just 10 watts it gives 800 lumens of soft white 3000K — the look of a 60W incandescent — through a wide 220° beam that spreads light broadly, and its standard E26 medium base makes for an easy retrofit into common 12V sockets. A 10,000-hour rated life keeps warm light going where standard voltage isn't available. Non-dimmable, for 12V circuits only — do not use with a dimmer.

The direct, code-compliant LED for energy-saving fixtures that won't take screw-in bulbs. Its GU24 twist-and-lock base drops right in, and just 10 watts give 800 lumens of soft white 3000K through a wide 220° spread — replacing a 60W incandescent, dimmable to suit the room.

The Xtricity GU24 LED is the direct, code-compliant upgrade for energy-saving fixtures that won't accept screw-in bulbs — its twist-and-lock base drops into the GU24 housings common in bathrooms and kitchens. At just 10 watts it gives 800 lumens of soft white 3000K through a wide 220° beam, replacing a 60W incandescent. Dimmable on standard 120V circuits, it works in enclosed and open GU24 fixtures, and a 25,000-hour rated life makes it a long-term, low-maintenance choice for code-compliant installations.

Some bulbs disappear into the fixture; this one is the fixture. Smoked glass wraps a vintage filament that glows an ultra-warm 2200K, turning exposed sockets into a deliberate design choice. Just 4.5 watts replaces a 60W incandescent, and it dims on cue when the mood calls for softer light.

This Xtricity smoked-glass filament LED is built for fixtures where the bulb is meant to be seen. Its vintage exposed-filament styling sits behind smoked glass for a decorative, warm glow, while the ultra-warm 2200K colour temperature creates cozy, ambient lighting in restaurants, bars, boutiques and intimate home settings. Energy-efficient at 4.5W, it delivers 450 lumens and replaces a 60W incandescent. It fits a standard E26 medium base on 120V and is dimmable, so it works seamlessly with standard dimmer switches to fine-tune the atmosphere.

An oversized G40 globe wrapped in smoked glass, with a vintage filament glowing amber at the centre — this is the bulb that becomes the centrepiece of an open pendant or bath bar. Just 5 watts conjures 500 lumens of ultra-warm 2200K ambiance, and it dims to set exactly the right mood.

The Xtricity G40 globe is a statement bulb made for fixtures where the light source is on full display. Its oversized smoked-glass globe and vintage filament look bring character to exposed pendants and bath bars, while the ultra-warm 2200K amber glow delivers pure ambiance. At just 5W it produces 500 lumens and replaces a 60W incandescent, fitting a standard E26 medium base on 120V. Fully dimmable, it adjusts to any setting, and it carries a 15,000-hour rated life for years of decorative character.

Bold blue across a facade, a patio, or a holiday display — no gels, no filters, just a screw-in PAR38 that throws the colour straight from the bulb. It draws 7 watts, weathers the outdoors, and keeps the show going night after night.

The Xtricity PAR38 color flood casts a bold blue beam for outdoor accent, holiday and event lighting — no gels or filters required, since the colour comes straight from the bulb. Outdoor-rated to weather the elements, it suits porches, facades and landscapes. It draws 7W on a standard E26 medium base at 120V and carries an 11,000-hour rated life. The bulb is non-dimmable, giving a consistent colour for seasonal and architectural displays.

Vivid red, straight from the bulb — no gels, no filters, no fuss. This screw-in PAR38 floods patios, facades and holiday displays in bold colour on just 5 watts, and stands up to the outdoors season after season.

The Xtricity PAR38 color flood throws a bold red beam for outdoor accent, holiday and event lighting — no gels or filters needed, since the colour comes straight from the bulb. Outdoor-rated to weather the elements, it suits porches, facades and landscapes. It draws 5W on a standard E26 medium base at 120V with an 11,000-hour rated life. The bulb is non-dimmable, delivering a consistent red for holiday lighting, event staging and architectural accents.

Striking green, straight from the bulb — no gels, no filters, no compromise. This screw-in PAR38 floods gardens, facades and holiday displays in vivid colour on just 7 watts, and holds up outdoors year-round.

The Xtricity PAR38 color flood casts a bold green beam for outdoor accent, holiday and event lighting — no gels or filters required, since the colour comes straight from the bulb. Outdoor-rated to weather the elements, it performs on porches, facades and landscapes. It draws 7W on a standard E26 medium base at 120V with an 11,000-hour rated life. The bulb is non-dimmable, holding a steady green for holiday landscape lighting, garden features and event staging.